Lutron RadioRA 3 Lighting Control in Vancouver and the North Shore

RadioRA 3 turns every light in your home into one system: engraved keypads by the door, a scene for every room at the touch of a button, lights that follow the sunset, and shades that close on hot afternoons. Bourne Electric designs, installs and programs RadioRA 3 systems for homes across Greater Vancouver, the North Shore and the Southern Gulf Islands.

As a Lutron Preferred Pro at the Platinum level, we handle the whole job, from the lighting plan to the last keypad engraving, under Technical Safety BC Contractor Licence LEL0101560.

Home theatre room with dimmed lighting
Kitchen with pendant and under-cabinet lighting

No rewiring in a finished home

RadioRA 3 is wireless. Its dimmers and keypads replace your existing switches and talk to a central processor over Lutron’s own radio network, not your Wi-Fi, so there are no new control wires to run through finished walls. That makes it a strong fit for established West Vancouver and North Shore homes, where opening up plaster or panelling is the part everyone wants to avoid.

In a new build or major renovation, we plan keypad locations and lighting circuits with your builder at rough-in, so every keypad lands where you will actually reach for it.

Caséta, RadioRA 3 or HomeWorks?

Lutron makes three home systems. The right one depends on the size of your home and how much you want the system to do.

Caséta

Best for: A few rooms, or a first step

Installed by: Homeowner or electrician

Controls: Pico remotes and the Lutron app

Programming: Set up in the app

RadioRA 3

Best for: Whole homes, retrofits and most renovations

Installed by: Trained Lutron installer

Controls: Engraved Sunnata keypads and the Lutron app

Programming: Designed and programmed by your installer

HomeWorks

Best for: Large new builds and estates

Installed by: Trained Lutron installer

Controls: Premium keypad ranges and the Lutron app

Programming: Designed and programmed by your installer

If Caséta will do the job in your home, we’ll tell you.

Keypads, scenes and schedules

Every keypad button is engraved with what it does: Dinner, Movie, Goodnight, Away. One press sets every light in the room, or the whole house, to the levels you chose. Lights can follow the sunset through the year, and with Lutron occupancy sensors they switch off when a room empties.

Living room with warm evening lighting
Living room with window shades and large windows

Motorized shades

RadioRA 3 runs Lutron motorized shades and drapery on the same system as the lights, so one keypad can dim a room and lower its shades together. Shades can close on a schedule to keep west-facing rooms cool on summer afternoons and open again in the morning. We plan and wire the shades with the lighting, so one installer answers for both.

One electrician for lighting, backup power and EV charging

Bourne Electric is also a certified installer of Tesla Powerwall and the Tesla Wall Connector, so one licensed team can plan a home’s lighting control, battery backup and EV charging together. With Powerwall backing up the circuits your lighting runs on, your RadioRA 3 system keeps working through a power outage.

Tesla Powerwall 3 mounted on a home exterior with a Tesla parked beside it

How a RadioRA 3 project runs

  1. Walkthrough. We go room by room: how you use the house, which fixtures you have, where keypads should go.

  2. Design. You get a lighting plan and a keypad schedule showing the engraving on every button, with your quote.

  3. Installation. Licensed electricians install the dimmers, keypads, processor and any shades, with permits where required.

  4. Programming. We set up your scenes, schedules and sensors in Lutron’s software.

  5. Handover. We walk you through the system and the app.

Frequently Asked Questions

Are you a certified Lutron installer?

Yes. Bourne Electric Ltd. is a Lutron Preferred Pro at the Platinum level and a licensed electrical contractor (Technical Safety BC Licence LEL0101560).

Do I need to rewire my house for RadioRA 3?

Usually not. RadioRA 3 dimmers and keypads are wireless and replace your existing switches, so finished walls stay closed. We confirm at the walkthrough, since some fixtures need a specific dimmer.

Should I choose Caséta or RadioRA 3?

Caséta suits a few rooms or a first step into smart lighting. RadioRA 3 suits whole homes, with engraved keypads, shades and professional programming. If the smaller system does what you need, we’ll recommend it.

Can RadioRA 3 control my shades?

Yes. Lutron motorized shades and drapery run on the same system as the lights, so one keypad or scene can set both.

Where do you install RadioRA 3?

Across Greater Vancouver — including North Vancouver, West Vancouver, Coquitlam, Port Moody, Anmore, Richmond, Burnaby and White Rock — and the Southern Gulf Islands: Salt Spring, Galiano, Mayne, Pender and Saturna.

Tel/Text: 778.296.2500

Toll Free: 1.800.270.1781

Email: Information@Bourne-Electric.com

Bourne Electric Ltd.


Contractor Licence: LEL0101560

Bourne Electric Ltd. 2026